Step 2
Remove the remaining parts from the Frame Kit: 4 Side Supports
(11), 8 carriage
bolts (DU), and 8 wing nuts (CP).
Locate 1 or 2 Sidetable(s)
(9), Control
Panel (25), 2 Control
Knobs (32), and Side
Burner Kit, if needed, for assembly in this step.
2a-insert
2 Side Supports (11)
inside the Sidetable (9) until the
tabs on the Sidetable snap into
the notches, Figure 1.
2b-Loosely
attach the
Sidetable assembly to the
leg with 3 carriage bolt
(DU), 3 star washers and
3 wingnuts (CP), Figure 2.
2C-If the grill has two side tables,
repeat steps 2a and 2b.
If the grill has a side burner, attach
the 2 remaining Side Supports
(11) as described in 2b. Assemble
the side burner components
per
the assembly instructions
located
in the side burner kit.
2
DU
CP
_P
ID w
IMPORTANT: M odel920.16201cannot
be convertedto a SideBurner unit. If a
conversionis attemptedthe warrantywill
be void!
2d-Remove
the 4 wingnuts (CP), 4
star washers (MR) and 4 carriage
bolts (DU) from the back legs
and side supports. Place the Back
Brace
(10) inside the two back legs
and secure with the carriage bolts,
star washers and wingnuts, Figure 3.
11412242 (Pg 6)
of grill