Advertisement
Assembly instructions
I MPORTANT:
During assembly,referto Parts Diagramand Parts Listson pages 14 and 15.
Step
1
Open the Frame Kit,
Remove Legs (4 and 13), 2 carriage bolts (DU) and 2 wing nuts (CP).
Locate the Base Assembly
(1), Bottom
Casting (42) and Grease Can Wire
nmiddleholes
(49) for assembly in this step.
1a-Insert
Legs (4 and 13) and
align middle holes, Figure 1.
I b-Lower
legs at the same
time onto the Base Assembly
(t). Snap into place, Figure 2.
Correct
Incorrect
1 C- Place the Iocator pins on the
Bottom Casting (42) into the
alignment holes on the legs.
Secure with 2 carriage bolts (DU),
2 star washers and 2 wing nuts
(CP), Figure 3.
1d-Place
the Grease Can Wire (49)
into the Bottom Casting, Figure 4.
Note: Grease can not included.
Use an ordinary soup can.
Locatorpins
3
•!•!
|
4
11412242
(Pg.4)
Advertisement
