5C-Assemble
the Cylinder Wire (78) as shown in steps 1-3.
1. Insert the Cylinder Wire into the right legs, Figure 1.
2. Rotate the wire as shown in Figure 2 until it fits over the Cylinder collar.
3. Attach the Type 1 Nipple to the Cylinder, see Figure 3.
Back view
Right
end
The
Outlet
Valve
must
face
the
grill front.
IMPORTANT!
To ensure proper gas flow,
burner control valves must be "off"
before opening the gas cylinder valve.
L_
WARNING:
During
assembly
of grill and when
attaching
or
replacing
the LP gas cylinder,
ensure
that the gas
supply
hose
is free
of kinks
and/or
damage
and is at
least
3" away
from
hot surfaces
such as the grill
casting.
11412242(Pg.
13)