Advertisement
Available languages
Available languages
After the initial setting you set when you first turned
on the power, you can set the D.S.T. (Daylight
Saving Time) again. When you set this function to
ON, the date information adjusted for the area you
set will be adjusted to the one added by another 1
hour. In addition, the time difference wiII be adjust-
ed as follows: 2 a.m. on first Sunday in April to 3
a.m., 1 hour ahead, and 2 a.m. on last Sunday in
October to 1 a.m. 1 hour behind.
(D CD CD
G3 G3 GD
CD (_) Q
C_NEL
6QQS,
,,CD CC)CD C)
44_u?
S_UP_TSLEEP L_
,-VOL A/v
3
Select "D.S.T. (Daylight Saving)".
,, Using [OH A/T] on the remote control, select
"D.S.T. (Daylight Saving)".
DTVDISPLAY IL£TTERSOX]
DTVCS
_'-DST (Daylight Sawng) [---]
TINEZONE
[ALASKA]
4 Set "D.S.T. (Daylight Saving)".
,, Using [VOL ,_FZ] on the remote control, set to
[ON] or [OFF].
DTVDISPLAY ILETTERSOX]
DTVCC
_'-DST (Daylight Sawng) [ON]
T]NEZONE
[ALASKA]
Display the MENU screen.
,, Press [MENU] on the remote control.
The following MENU screen is displayed.
J" PICTURE
CHANNEL SET
[ENG]_ESP/FRA
V-CHIP SETUP
CAPTION [OFF]
DTV SET UP
5 To exit the menu, press [MENU] on the remote
control.
NOTE:
When you set D.S. 7_to OFF. the date and time information
adjusted
for the area
set
bY TIME
ZONE
is displayed.
2
Select "DTV SET UP".
,, Using [OH AkfT] on the remote control, select
"DTV SET UP".
PICTURE
CHANNEL SET
[ENG]_ESP/FRA
V-CHIP SETUP
CAPTION [OFF]
_"DTV SET UP
,,When you press [VOL ,_] on the remote control,
the following MENU screen is displayed.
_*DTV DISPLAY [LETTERBOX]
DTVCC
D S 3"[Daylight Sav_ng][---]
TIME ZONE
[ALASKA]
EN
Advertisement
