Advertisement
Available languages
Available languages
if you switch wires (e.g. between antenna and
CATV) or if you move the TV to a different area
after the initial setting, you need to perform AUTO
PRESET CH again. This function Iets you easily
select the receivable channels with [OH A/_'] and
the TV memorizes them even if you switch wires.
(3D CD CD
(Z) Q
GD
CD (D CD
oooo
, VOL_
NOTE:
* Make sure if the TV is connected
to antenna
or cable.
When aerial antenna is connected,
select "AUTO PRESET
CH (TV)" or '(TV/DTV)" at step 3. When connected
to
CATV_ select "AUTO PRESET OH (CATV)L
4 *Only for TV channels
,, Using [OH ,&/_] on the remote control, select
"AUTO PRESET CH(TV)".
ADD/DELFTE
_" AUTO PRESETCH(TV)
AUTO PRESETCH(OATV)
AUTO PRESETCH([}TV_V)
o Press [VOL ,_] on the remote control.
Scanning and memorizing the channels auto-
matically starts.
AUTO PRESET CH_
_I_
,, When the scanning and memorizing
are com-
pleted, the memorized smallest channel in the
analog broadcasting will be displayed.
When scanning TV or CATV only
Select analog mode by pressing [DTV_V].
2 Display the MENU screen.
,, Press [MENU] on the remote control.
The following MENU screen is displayed.
I,- PICTURE
CHANNEL SET
[ERG]_ESP/FRA
V-CHIP SETUP
CAPTION [OFF]
4 *Only for CATV channels
,, Using ION ,&/_] on the remote control, select
"AUTO PRESET CH(CATV)".
ADD/DELETE
AUTO PRESETCH(TV)
_" AUTO PRESETGH(CATV)
AUTO PRESETGH([}TV/TV)
,, Press [VOL ,_] on the remote control.
Scanning and memorizing the channels auto-
matically starts.
3
Select "CHANNEL SET".
,, Using [OH A/_]
on the remote control, select
"CHANNEL SET".
AUTO PRESET CR(CATV)
_1_
PICTURE
CHANNEL SET
[ENG]_ESP/PRA
V-CHIP SETUP
CAPTION [OFF]
,, When the scanning and memorizing
are com-
pleted, the memorized smallest channel in the
CATV will be displayed.
,, Press [VOL ,_] on the remote control.
EN
Advertisement
