Sony Handycam DCR-SR220 Operating Manual page 17

[] EASY button
Press EASY todisplay
ff'-m_land most
of the settings are set automatically lbr
easy recording/playback. To cancel,
press EASY again.
[] DISP/BATT INFO button
You can switch the screen display when
you press while the POWER switch is
set to on.
When you press while the power is
set to OFF (CHG), you can check the
remaining battery.
[] [] (back light) button
Press [] (back light) to display [] for
adjusting the exposure t_r backlit
subject. Press [] (back light) again to
cancel the backlight function.
[] Built-in microphone
Sound picked up by the mterual
microphone is converted to 5.1ch
surround sound and recorded.
[] Flash
The flash will flash automatically
depending on recording conditions in
the dethult setting.
Touch _ (HOME) -_ _ (SETTINGS)
-+ [PHOTO SETTINGS] -+ [FLASH
MODE] to change the setting.
[] Remote sensor/In_cared port
Receives the signal from the Remote
Commander.
[] Tripod receptacle (Bottom surthce)
Attach a tripod (optional) to the
tripod receptacle using a tripod screw
(optional: the length of the screw must
be less than 5.5 mm (7/32 in.)).
[] "9 (DISC BURN) button
Create a disc by connecting the
camcorder to a computer. For details,
see "PMB Guide" (p. 5).
[] Active Interface Shoe _
The Active Inter*hce Shoe supplies
power to optional accessories such as
a video light, a flash, or a microphone.
The accesso U can be turned on or offas
ynu operate the POWER switch on your
camcorder.
[] InterIhce connector
Connect }Tourcamcorder and the
Handycam Station.
[] A/V Remote Connector/A/V OUT jack
Connect with the component A/V cable
or A/V connecting cable.
[] _ (USB) jack
Connect with the USB cable.
US
17