Roland DM-80 Owner's Manual page 29

Ш System Real Time Message
When the system parameter MIDI Clock output is on, sends this message in
accordance with the tempo map.
@ Timing Clock
Status
F8H
@ Start
Status
FAH
@ Continue
Status
ЕВН
@ Stop
Status
FCH
© MIDI Time Code
Ш System Common Message
О MTC quarter frame message
ЕІ < message >
FI = System Common status byte
< message > = Onnndddd
nnn = Message Type
0 = Frame count LS nibble
1 = Frame count MS nibble
2= Seconds count LS nibble
3 = Seconds count MS nibble
4 = minutes count LS nibble
5 = minutes count MS nibble
6 = Hours count LS nibble
7 = Hours count MS nibble and SMPTE Type
dddd = 4 bits of binary data for this Message Type
Frame count xxxy yyyy xxx : Reserved (=0)
ууууу : Frame # (0-29)
Secouds count xxyy yyyy XX : Reserved (= 0)
yyyyyy : Second (0-59)
Minutes count xxyy yyyy хх : Reserved (= 0)
yyyyyy : Minutes (0 – 59)
Hour count хуу? 2212 x : Reserved (= 0)
yy : Time code type
O= 24 Frame/Second
1= 25 Frame/Second
= 30 Frame/Second (Drop Frame)
3= 30 Frame/'Second (Non - drop)
zzzzz : Hour (0 - 23)
When the parameter MTC Output is on, the recorder sends the MTC quarter
frame message while running.
ROLAND DM-80-4 / DM-80-8 • OWNER'S MANUAL 27