Returning For Service - Roland DM-80 Owner's Manual

RETURNING FOR
SERVICE
The DM-80 has no user-serviceable parts. Attempts by unauthorized
personnel to repair or modify the DM-80 will void the warranty. If you
have trouble with the unit, you must bring or sent it to an authorized
Roland Service center. Consult your dealer or Roland for the nearest
service center.
When preparing to ship the unit, first be sure to park all internal drives in
the DM-80, as well as any drives connected to it. From the SYSTEM page,
press SHUT (F1). Wait until all drives have stopped spinning,
approximately 30 seconds, before turning off the power or moving the unit.
Use the original packing material that came with the DM-80 to ship the
unit. If the original packaging is not available, use a reinforced,
sealable, foam-lined case. Remember, hard disks are fragile devices.
24 ROLAND DM-80-4 / DM-80-8 » OWNER'S MANUAL