Table of Contents
Advertisement
Using an optional timer, you can start and stop recording and playback
while the recorder is unattended.
Timer
to ac outlet
—
to ac outlet
Video monitor
TIMER RECORDING
1. Turn the recorder on and make preparations for recording.
{See page 16).
2. Set the time to start and stop recording on the timer.
3. Set the TIMER switch to REC,
The recording wil! begin at the time set on the timer.
When the TIMER switch is set to REC, the function buttons other than
the STOP button cannot function. Also the STOP button cannot also
function during the tape being threaded just after the power Is turned on.
@When the timer recording Is finished, be sure to. set the TIMER switch
to OFF. If the POWER switch is set to ON with the TIMER switch remain-
ed to REC, the recording
will automatically
begin and the recorded
material will be erased.
TIMER PLAYBACK
1.Turn
the
recorder
on
and
make
the
preparations
for play-
back. (See pages 16 and 19.)
2. Set the.time to start and stop playback.on the. timer.
3. Set the TIMER switch to PLAY,
The playback will begin at the time set on the timer.
—If the picture completely disappears at times or if only snow or streaks may appear on
the monitor screen,
Hacbiatnd heads may be dirty. Clean the heads using the KC-1C Cleaning Cassette
s g
(optional).
1. Eject the Inserted casseite.
2. Insert the cleaning cassette.
3. Press the RESET button so that the time counter indicates "00 00".
4, Press the PLAY and REC buttons simultaneously. The tape will start running.
5. When the time counter indicates "00 30", press the STOP bution.
6. Eject the cleaning cassette.
Do
not run a cleaning cassette for more than 30 seconds
at a time, nor use it unless the picture symptoms clearly in-
dicate the need for head cleaning. Excessive use of the
cleaning cassette will shorten the life of the heads.
Do not rewind the cleaning cassette every time itis used.
—_ ef no video signal is connected, the time counter does not
Run the tape to its end, then rewind it.
change as the tape runs. In this case, use
a clock to monitor
You
can run through a cleaning cassette several times,
the taperunning
time
and
stop the tape it has run
30
although It does gradually become less effective.
seconds.
24
Advertisement
Table of Contents
