Ee * Weak Signal Display On/Off; Auto Shut-Off; Shuttle Variable Speed Search - Panasonic Omnivision PV-V4640 Operating Instructions Manual

§ Weak Signal Display ON/OFF Feature
When "ON" is selected, picture is displayed even when broadcast
*Important: If the remote control POWER, ACTION, PROG/VCR+, CH4/¥, NUMBERED keys,
INPUT, SEARCH/ M/A SKIP or ADD/DLT button does not work when pressed, press
the VCR button on the remote and try the button again.
signal is weak or nonexistent.
MENU i
O n Display SET UP
SET UP FEATURE CHANNEL.
SET UP CHANNEL ed 1) Press AV to
IDIOMA/ LANGUE: ENGLISH] | . " E select.
VCR' S OUTPUT CH:3 ARA,
SELECT:4 Y KEY => 2) Press » to
> Se y , ¡
END ¡ACTION KEY í display.
SET UP CHANNEL Set ON or OFF.
CHANNEL CAPTION r ` select.
¡OFF | |w ( 5 0 a n e)
CABLE/DSS BOX SET UP _ |2) Press P to
VCR Plus+ CH SET UP E set
SELECT:4 Y KEY
SET :» KEY
END :ACTION KEY
* ON --> Picture is displayed regardless of signal condition, and
may not always be clearly visible.
OFF --> Screen turns solid blue when signal is absent or weak.
* If VCR is connected to equipment which has blue back feature,
SAM ON Ml nave Ng egct on Ma CAM =. ON will have no effect on the other equipment.
Return to normal
4 screen.
Press ACTION twice.
Auto Shut-Off Feature
When "ON" is selected, VCR shuts itself off when playback of a
blank portion of tape continues or no signal (except when LINE
is selected) is detected for over 5 minutes.
Repeat step "a" and "b" on page 38 to
display SET UP VCR.
SET UP VCA Set ON or OFF.
1) Press AY to
select.
2) Press > to
set.
REPEAT PLAY
SELECT:4 ¥ KEY
SET 7» KEY
END ¿ACTION KEY
Press ACTION twice. :
Return to normal
COR ien
2 SELECT!
SET
A :PLAY
*. Y:STOP
> :FF
1 ACTION
SHUTTLE
Ring
$91n] YODA lead
Shuttle Variable Speed Search
The SHUTTLE Ring allows you to smoothly
control the tape speed during special
effects playback in both forward or reverse.
Place the forward
or reverse search.
Turn SHUTTLE Ring
while in Play or Still
mode.
e The more you turn the
Ring, the faster the
search speed wili be.
B Release the Shuttle mode.
Press a function button such as :
PLAY, STOP, etc.
¢ The VCR performs the function of the
button pressed.
e When the SHUTTLE Ring is turned more than
half in Stop mode, normal Fast Forward or
Rewind will begin.
e Some noise bars are normal during Shuttle
operation.
After 3 minutes in Still or Slow, the VCR will go
into Stop mode.
When the SHUTTLE Ring is released, the
VCR goes into Still mode.