Weak Signal Display On/Off - Panasonic Omnivision PV-9405S Operating Instructions Manual

2 о -
"TAPE POSITION, or ADD/DLT button does not work when КРА) press the VCR button on the
remote and try the button again.
Weak Signal Display ON/OFF Feature
When "ON" is selected, picture is displayed even when broadcast
signal is weak or nonexistent.
1 Display menu.
Press ACTION.
2 SET UP VCR
SET UP FEATURE
Display SET UP CHANNEL.
1) Press AY to
SET CLOCK select.
ISET UP CHANNEL|
i TBIOMA/ LANGUE: ENGL | SH 2) Press P to
SELECT:A Y KEY display.
SET :b KEY
---- SET ИР CHANNEL ----) Set ON or OFF. 2 SELECT/
equis 1) Press АЎ to SET
CHANNEL_CAPTION select. A PLAY
К aes : OFF
2) Press № to set.
SELECT:4 Y KEY
SET :> KEY
* ON --> Picture is displayed regardless of signal condition, and
may not always be clearly visible.
OFF --> Screen turns solid blue when signal is absent or weak.
* If VCR is connected to exquigment which has blue back feature,
ect on the other equipment.
Return to normal
4 screen.
Press ACTION twice.
selecting ON will have no e
$531n HOA Jeloe
Auto Shut-Off Feature
When "ON" is selected, VCR shuts itself off when playback of a blank
portion of tape continues or no signal (except when LINE is selected) is
detected for over 5 minutes.
Repeat step "a" and "b" on page 24 to
display SET UP VCR.
SET UP VCR Set ON or OFF.
REPEAT PLAY ce 1) Press AV to
select.
AUTO SHUT-OFF
2) Press № to set.
SELECT:A Y KEY
SET ¡> KEY
END ACTION KEY
C Return to normal
screen.
Press ACTION twice.
25