Vcr & Cassette Information; Ce Eeeeeees; Reset All Vcr Memory Functions; Prevent Accidental Tape Erasure - Panasonic Omnivision PV-V4640 Operating Instructions Manual

VCR & Cassette Information
Reset All VCR Memory Functions
Use when moving VCR to new location, or if a mistake
was made in the One Time VCR Setup section.
+ Make sure a tape is not inserted in the VCR.
1 TurnVCR
Power on.
2 Press and hold both PLAY
and CHANNEL A on the VCR
for more than 5 seconds
e ==.
¢ The power will shut off.
3 Do "One Time VCR Setup" steps on page 8.
DST (Daylight Saving Time)
VCR auto adjusts clock for DST. (Page 11.)
Spring (First Sunday in April)
DST:ON --> sets clock ahead one hour.
Autumn (Last Sunday in October)
DST:ON --> Turns clock back one hour.
* If your area does not observe Daylight Saving
Time, select DST:OFF.
+ Keep these time changes in mind when
programming the VCR for timer recordings.
Prevent Accidental Tape Erasure
Break off the tab.
Record Tab
Screw driver OS
To record again ASS
Record/Playback Time
Only use tapes with the mark in this unit.
Tape Speed Type of Video Cassette
Setting T60 T120
2 Hours
40 Minutes
SP
(Standard Play) 1 Hour
For assistance, call 1-800-211-PANA(7262).