Chapter 2: Scanning; Two Ways To Scan - Visioneer Strobe XP 100 Installation Manual

Scanning
This section explains how to scan with your Strobe XP 100 scanner.
T W S
WO AYS TO
You can scan items by pressing the scanner button or by clicking a Scan
button in the PaperPort software. The basic difference between the two
methods is that when scanning with the button, you use the OneTouch
software's scanning options, and when scanning from PaperPort you use
its scanning options. Both methods scan equally well, so use the one
with the appropriate options for the item you're scanning.
•
Scan with the scanner button
Insert an item to scan and then press the scanner button. The item is
scanned with the settings already selected for the button. For more
details, see "Scanning by Pressing the Scanner Button" on page 14.
•
Scan from the PaperPort software
To scan from the PaperPort software, start the software, and click the
Scan icon on the PaperPort command bar.
You can then select scanning options before you start the scan. See
"Scanning from the PaperPort Software" on page 26 for details.
Note: Always remove any staples or paper clips from the documents
before inserting them into the scanner. Staples and paper clips can jam
the feed mechanism and scratch the internal components.
CAN
T W S
WO AYS TO CAN
13