Adjusting Scan Settings And - Visioneer OneTouch 6600 Installation Manual

A S S
DJUSTING CAN ETTINGS AND
When scanning using a configuration you created yourself, you can
adjust that configuration's scan settings and page settings. For example,
if the scanned image is too dark, you can adjust the brightness of the
scan setting.
Note: You cannot change the scan settings or page settings for any of
the predefined scan configurations. You can only adjust settings for
scan configurations that you create yourself.
To adjust the scan settings and page settings:
1. Press and hold down a button on the scanner.
The Configuration dialog box opens.
The selected tab on the dialog box corresponds to the button you
pressed. You can click the other tabs for the other buttons.
2. In the Select Configuration list, click the configuration you want to
adjust.
For example, the following figure shows a configuration named
Special Scan for Dark Print (which you would have created earlier).
S B
CANNING FROM THE UTTON
P S
AGE ETTINGS
P S
ANEL ON THE CREEN
23