Visioneer OneTouch 6600 Installation Manual page 14

10
V O
ISIONEER NE
T 6600 S
OUCH CANNER
To connect the scanner:
1. After checking for the above problems, if the scanner does not start
automatically, right-click the scanner icon with the red X over it.
The shortcut menu appears.
2. Select Connect from the shortcut menu.
The software finds the scanner and makes the connection. The
scanner icon will no longer have a red X through it, and you're
ready to begin scanning.
If you try all the troubleshooting procedures described above and in the
Readme file, and the scanner icon still has a red X through it, you may
have a malfunctioning scanner. Please see "Visioneer OneTouch 6600
Specifications" on page 48. Also visit our web site at www.visioneer.com
for additional technical information.
I U
NSTALLATION AND SER
G
UIDE