Sony WEGA KV-30XBR910 Operating Instructions Manual page 34
Hide thumbs
Also See for WEGA KV-30XBR910:
- Service manual (255 pages) ,
- Operating instructions manual (116 pages) ,
- Dimensions (1 page)
Table of Contents
Advertisement
Notes on UsingThis Connection
Watch
the satellite
receiver
Press TV/VIDEO repeatedly
to select the VCR input
(VIDEO 1 in the
illustration).
The VCR must be turned
on and set to the satellite receiver's
line input.
Watch the VCR
Press TV/VIDE0repeatedly
to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
Set up the TV remote control
If you have a non-Sony
VCR or satellite receiver, you must program
the
to operate
the satellite
remote control. See "Programming
the Remote Control"
on pages 47-48.
receiver or VCR
Activate the TV remote
For the satellite receiver, press SATICABLE FUNCTION. F or the VCR, open the
control to operate
the satellite
outside cover, as shown on page 46. Then set the A/V slide switch to the
receiver or VCR
position you programmed
for the VCR.
Control satellite receiver and
See "Operating
a Satellite Receiver"
on page 58 and "Operating
a VCR" on
VCR functions
with the TV
page 58.
remote control
Label video inputs
to easily
See the instructions
for setting up Video Labels on page 90.
identify equipment
connect_
to the TV
33
Advertisement
Table of Contents
