Sony WEGA KV-30XBR910 Operating Instructions Manual page 22

Notes on UsingThisConnection
Toconnect the cable box and cable
1
Connect the cable from your cable company to the TV's
VHF/UHF jack.
2 Use a coaxial cable to connect the TV's TO CONVERTER jack to
the cable box's input jack. (The TV's internal converter lets you
switch between unscrambled signals coming straight into the TV
and scrambled signals coming in through the cable box,
eliminating the need for an external splitter.)
Use a coaxial cable to connect the cable box's output jack to the
TV's AUX jack.
4 Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 41.
iN
Coaxial cable
OUT 3
2
Coaxial cable
1
m
AUX
TO
CONVERTER
Cable (unscrambled channels) VRF/URF
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to switch channels.
Set up the TV remote control Program the remote control. See "Programming the Remote Control" on
to operate the cable box pages 47-48.
Activate the remote control to Press SAT/CABLE FUNCTION.
operate the cable box
Prevent the accidental When using the cable box, you need the TV to stay on the channel the cable
switching of TV channels box is set to (usually channel 3 or 4). You can use the TV's Channel Fix
feature to lock in a specific channel. For details, see Using the Channel
Menu" on page 84.
Switch the TV's input Press ANTto switch back and forth between the TV's VHF/UHF
between the cable box and (unscrambled channels) and AUX (scrambled) inputs.
cable
21