Sony WEGA KV-30XBR910 Operating Instructions Manual page 28
Hide thumbs
Also See for WEGA KV-30XBR910:
- Service manual (255 pages) ,
- Operating instructions manual (116 pages) ,
- Dimensions (1 page)
Table of Contents
Advertisement
m
AN cable
Notes on Using This Connection
Watch cable (unscrambled)
Press TV/VIDE0repeatedly
to select the cable input (UHF/VHF
in the
channels
illustration).
Watch cable box (scrambled)
Turn on the VCR and tune it to the channel the cable box is set to (usually
channels
channel 3 or 4). Press TVNIDE0 repeatedly
to select the VCR input (VIDEO 1
in the illustration).
Use the cable box to change channels.
Watch the VCR
Press TV/VIDE0repeatedly
to select the VCR input
(VIDEO 1 in the
illustration).
Set up the TV remote control
If you have a non-Sony
VCR, you must program
the remote control. See
to operate
the cable box or
"Programming
the Remote Control"
on pages 47-48.
VCR
Activate the remote control to
For the cable box, press SAT/CABLE FUNCTION. F or the VCR, open the outside
operate
the cable box or VCR
cover, as shown on page 46. Then set the A/V slide switch to the position
you programmed
for the VCR.
Control specific cable box and
See "Operating
a Cable Box" on page 59 and "Operating
a VCR" on page 58.
VCR functions
with the TV
remote control
Label video inputs
to easily
See the instructions
for setting up Video Labels on page 90.
identify equipment
connected
to the TV
27
Advertisement
Table of Contents
