Bajaj pulsar F250 Owner's Manual page 18

DTE & TRIP
DTE (Distance to empty):
It indicates the estimated distance that the vehicle can travel under current fuel
economy & fuel level condition.
DTE calculation is independent of TRIP and based on AFE for distance covered for last 25
Kms.
Max count of DTE is 990 Km. speedometer will display values in multiple of 10.
TRIP Setting:
If Set button is pressed more than 3 sec.in TRIP1 or TRIP 2 mode, then respective AFE & trip distance will reset to Zero
while DTE will continue to show earlier value.
Note:
After completion of max value of 999.9 Km, selected trip display will get freezed and will not get set automatically to
zero.
However speedometer will continue to calculate and display AFE value.
Note:
If vehicle is driven by ignoring fuel level display & Tank symbol ( ) blinking after reaching fuel unutilized level DTE will be
shown as '--' Km.
During Petrol Relling:
If petrol lled is more than 1 Litre then DTE will be calculated based on the revised fuel volume.
If petrol lled less than 1 litre then there will be no change in DTE value.
14