Sony XAV-W600BT Service Manual page 8

XAV-W600/W650BT
7. Input the Bluetooth Local Name (BL_NAME).
(Input the model name with the keyboard on the smartphone,
or tap the "List" on the screen of the smartphone and select the
model name)
15Visual NFCtagWriter
Bluetooth Local Name
Bluetooth Device Addres
8. Input the Bluetooth address (BD_ADDR).
(Input the Bluetooth address (BD_ADDR) that confi rmed on
the screen in the test mode with the keyboard on the smart-
phone)
15Visual NFCtagWriter
XAV-W650BT
Bluetooth Device Addres
9. Tap the "Write" on the screen of the smartphone, in the state
that unchecked the box "Read-only".
15Visual NFCtagWriter
XAV-W650BT
001753767368
10. Touch the N-mark part of the smartphone to the N-mark part of
the unit.
8
11. Check that "Completed!" is displayed on the screen of the
smartphone.
Note 1: When "Completed!" is not displayed on the screen of the smart-
phone, refer to "3. Error Display" on the page 9.
15Visual NFCtagWriter
12. End the 15Visual NFCtagWriter application on the smart-
phone.
13. Check the operation of connecting with the smartphone by one
touch (NFC).
"OPERATION CHECK OF THE NFC AFTER
(Refer to the
COMPLETING THE REPAIRS" on the page 11)
14. Start the 15Visual NFCtagWriter application on the smart-
phone.
15. Tap the "Write" on the screen of the smartphone.
15Visual NFCtagWriter 15Visual NFCtagWriter
16. Check the box "Read-only" on the screen of the smartphone,
and tap the "Write" on the screen of the smartphone.
15Visual NFCtagWriter
XAV-W650BT
001753767368
– Continued on next page –