Sony XAV-W600BT Service Manual page 7

BLUETOOTH INFORMATION WRITING METHOD
(XAV-W650BT only)
When the complete BT board or VOL knob assy is replaced, it is
necessary to write the Bluetooth information (address).
Write the Bluetooth information (address) according to the proce-
dure below.
Confi rm the tool used in this work to the service headquarters.
Note: It is unnecessary for XAV-W600 to perform this work for NFC non-
compatible.
Preparation:
• Windows PC
• NFC compatible smartphone that installed the fi le manager ap-
plication (ASTRO File Manager, File Expert, etc.)
• USB cable for the smartphone
• 15Visual_NFCtagWriter_v120.apk
1. Installing the NFC Writing Application for the Servic-
ing
Install the 15Visual_NFCtagWriter_v120.apk on the smart-
phone for writing of Bluetooth information.
Procedure:
1. Prepare the 15Visual_NFCtagWriter_v120.apk fi le on the PC.
2. Connect the smartphone to the PC with the USB cable.
3. Transfer the 15Visual_NFCtagWriter_v120.apk to the smart-
phone.
4. When tapping the "Settings" → "Security" on the screen of the
smartphone, check the box "Unknown sources".
5. Disconnect the smartphone from the PC.
6. Use the fi le manager application to explore the 15Visual_NFC-
tagWriter_v120.apk on the smartphone.
7. Click on the 15Visual_NFCtagWriter_v120.apk to open it, and
install the 15Visual_NFCtagWriter_v120.apk to the smartphone.
8. When tapping the "Settings" → "Security" on the screen of the
smartphone, uncheck the box "Unknown sources".
– Screen after the installation
for reference –
Movies Settings WALKMAN
YouTube Media Player Play Store
Chrome 15visual Maps
NFCtagWrite
Album
Camera
15Visual
NFCtagWriter
Browser
application
2. Writing the NFC Tag Data
Write the NFC tag data (Bluetooth information) to the NFC mod-
ule in the VOL knob assy.
Procedure:
1. In the state of source off (Home screen is displayed), enter the
test mode by pressing the buttons on the remote commander in
order of the [4] t [5] t [0] (press only the [0] button for two
seconds).
2. The following screen is displayed and confi rm the BT Addr
(Bluetooth address).
(Displayed characters/values in the following fi gure are ex-
ample)
<Test Mode>
1.AUDIO FACTORY MODE
2.AUDIO DEBUG MODE
4.VISUAL FACTORY MODE
6.DESTINATION SETTING MODE
DEST: EUR
MCU: SONY-ST06-150721
Graphic: SONY-TW06-150721
Mecha: SONY-SP02-150721
Servo: HI6CD1-BBA-893D
BT: H28004-V2R133-20001 / XAV-W650BT
BT Addr: 001753767368
3. The resetting operation is executed by pressing the reset button
after the confi rming ends, and the unit returns to the normal
condition.
4. Turn on the NFC function of the smartphone.
5. Start the 15Visual NFCtagWriter application on the smart-
phone.
6. Tap the "Write" on the screen of the smartphone.
15Visual NFCtagWriter 15Visual NFCtagWriter
XAV-W600/W650BT
REGION: 2
– Continued on next page –
7