Main Unit Parts And Functions - Esoteric F-01 Owner's Manual

Main unit parts and functions

The control cover is open in the illustration above.
A
INPUT knob
Turn this knob to select the active input. Select the connector
that is connected to the device you want to play.
o You can change the names that are shown on the display for
the connectors (page 23).
When inputting a source name, use this to select characters.
Holding this down makes it function as a power button, turning
the unit on or putting it into standby.
B
Power indicator
This lights when the unit is on.
C
Remote control signal receiver
This receives signals from the remote control. When using the
remote control, point the end of it toward this receiver panel
(page 15).
D
Display
This shows the current input source name, volume, setting
items, etc.
14
E
VOLUME knob
Use this to adjust the volume.
Turn this knob clockwise to increase the volume and counter-
clockwise to decrease it.
Pressing this makes it function as a mute button, enabling
temporary muting of the sound. Press this again to restore the
volume setting (page 19).
When muted, "MUTE" blinks on the screen.
o The VOLUME knob will not affect input sources set to THRU>
(page 26).
Sudden loud noises might cause hearing damage and
V
other trouble. Always minimize the volume before
starting playback, and adjust it to an appropriate level
after playback begins.
F
Control cover
G
Maintenance port
This is used for maintenance. Do not connect anything to this
port unless instructed to do so by our service department.