Lincoln Electric LF 5D ADVANCED Operator's Manual page 8

Controls and Operational Features
4
6
2
Figure 1
Figure 2
1. EURO Socket: For connecting a welding
gun (for GMAW, FCAW process).
2. Quick Coupling Socket: Coolant outlet
(supplies cool coolant to the welding gun).
3. Quick Coupling Socket: Coolant inlet (takes
warm coolant from the welding gun).
WARNING
Maximum coolant pressure is 5 bar.
4. Output Socket for
welding: Depending on the process to
connecting Electrode Holder with lead
(SMAW) or Gauging Torch (CAG).
5. Advanced User Interface (U7): See „User Interface
Advancedʺ.
6. Remote Control Socket: For connecting a Remote
Control (see "Accessories" chapter).
7. Gas Quick Coupling
connecting a gas pipe.
English
5
1
3
7
8
9
10
11
SMAW and CAG
Socket: For
The machine allows the use all suitable shielding gases
with a maximum pressure of 5 bar.
8. Control Socket:
connecting a control cable. The CAN
protocol is used
between the power source and wire feeder.
9. Current Socket: For connecting a welding
cable.
10. Quick Coupling
(supplies cool coolant from cooler to the
welding machine).
11. Quick Coupling Socket: Coolant outlet
(takes warm coolant from welding machine
to cooler).
12. Gas Flow Regulator Plug: Gas Flow Regulator can
be purchased
section.
13. Switch: Cold Inch / Gas Purge: This switch allows
wire feeding (wire test) and gas flow (gas test)
without switching on the output voltage.
14. USB Port: For connecting the USB memory and
software updates.
15. Wire Spool Support: Maximum 5 kg spools. Accepts
plastic, steel and fiber spools onto 51 mm spindle.
Be sure that wire spool case has to be completely closed
during welding.
16. Spool with Wire: Not supplied as standard.
17. Wire Drive: 2-rolls wire drive.
The side panel and wire spool case have to be completely
closed during welding.
14
4
17
6
WARNING
5 pins socket for
for communication
Socket: Coolant inlet
separately. See "Accessories"
WARNING
WARNING
12 15 16
Figure 3
English