Setup 4 - Sony Cyber-shot DSC-N1 User's Manual / Troubleshooting

setup
4
For details on the operation _ page 61
4
The default settings are marked wifll _.
Enables you to perform calibration when tile touch panel buttons do not react at tile
appropriate points where you touch.
Using the stylus, touch the x mark displayed on the screen.
To stop the calibration process mid-way, tottch [Cancel]. The atlittstments made up to that
point are not el'fected.
c_ll#r_lon 1/3
eh t_,e"×"
The x mark moves on Ihe screen.
If you fail to press Ille right spot. the calibration is not performed. Press Ille x mark again.
Cl'mnges the function of some buttons to operate the camera installed in the Marine Pack.
0n (e_) ] Changes the ffmclion of Ihe bultons.
Off / Does not change any functions.
The buttons will work as follows when the setting is [On].
I[_1 /Scrcen display on/olt) bulton: Flash button for shooting. 11does not work lk)r viewing.
(_ 1(_ (zoom) button: Zoom bulIon tk)r shooling. Previous/nexl image butlon lor viewing
• Macro recording is activated aulomatically when lhe setting is [On].
• For details. _e tile operaling instructions supplied with the Marine Pack.