English
Versions with decompression valve
Press in the button to open the
N
decompression valve.
The decompression valve closes as
soon as the engine fires.
For this reason you must press in
N
the button before each starting
attempt.
40
All models
0
1
3
Push the hand guard (1) forward –
N
the chain is locked.
Press down trigger lockout (2) and
N
pull the throttle trigger at the same
time. Set Master Control lever (3) to:
Choke closed (l)
If the engine is cold (also use this
–
position if the engine stopped when
you opened the throttle after
starting)
Starting throttle position (n)
If the engine is warm, i.e. if it has
–
been running for about one minute.
Hold and start your saw as
N
described.
MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
When the engine begins to fire:
Set the Master Control lever to the
N
starting throttle position (n ).
Hold and start your saw as
N
described.
As soon as the engine runs
2
0
3
Press down the trigger lockout and
N
the blip the throttle trigger (4) – the
Master Control lever (3) moves to
the run position F and the engine
settles down to idling speed.
NOTICE
As the chain brake is still engaged, the
engine must be returned to idling speed
immediately – or the engine housing and
chain brake might otherwise be
damaged.
5
4