Stihl MS 210 Instruction Manual page 33

Depending on the version, your unit may
be equipped with a filler cap and fuel
tank with or without symbols.
Left: Filler cap without symbols.
Right: Filler cap with markings and
symbols on cap and tank.
Filler cap without symbols
Opening
Raise handle.
N
Twist filler cap counterclockwise
N
(approx. 1/4 turn).
MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
Remove the filler cap.
N
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank – leave
approx. 1/2" (13 mm) air space.
Closing
Handle is in an upright position:
Insert the cap – positioning marks
N
on the cap and the fuel tank opening
must line up.
The cap should drop fully into the
N
opening in this position.
Push the filler cap down and twist it
N
clockwise until it engages.
Flip the handle down.
N
Checking for proper closure
The lug on the grip must engage
N
entirely in the recess (arrow), and
the grip must lie completely flush
with the top of the cap.
English
31