Exmark VERTEX X Series Operator's Manual page 8

Safety
142-7432
S-Series Models Only
1. Read the instructions
before servicing or
performing maintenance
2. Time interval
3. Check the engine oil
level
4. Check tire pressure (2
locations)
142-8303
All S-Series Models and
X-Series Non-EFI Models Only
1. Fuse location
2. Relay location
3. Auxiliary, 15A
146-1017
X-Series Models Only
1. Wheel lug nut—torque to 95 ft-lb (129 N-m) (4x).
2. Read and understand the Operator's manual before
performing maintenance; check torque after first 100
hours and every 500 hours thereafter.
decal142-7432
5. Check hydraulic oil
level; refer to the
Operator's manual or
further instructions
6. Grease the idler pivot;
refer to the Operator's
Manual for further
instructions
7. Grease the caster
pivots; refer to the
Operator's Manual for
further instructions (2
locations)
decal142-8303
4. Regulator, 20A
5. Main, 20A
6. Start relay
decal146-1017
60 and 72 Inch Decks
X-Series Models Only
X-Series Models Only
1. Read the instructions
before servicing or
performing maintenance
2. Time interval
3. Check the engine oil
level
4. Check tire pressure (2
locations)
8
146-1018
146-2161
5. Check hydraulic oil
level; refer to the
Operator's manual or
further instructions
6. Grease the idler pivot;
refer to the Operator's
Manual for further
instructions
7. Grease the caster
pivots; refer to the
Operator's Manual for
further instructions (2
locations)
decal146-1018
decal146-2161