Panasonic SC-BT100 Operating Instructions Manual page 36

Optional connections and settings
Using FM/AM outdoor antenna (optional)
Use outdoor antennas if FM/AM radio reception is poor.
oDisconnect the antenna when the unit is not in use.
oDo not use the outdoor antenna during an electrical storm.
FM outdoor antenna
[Using a TV antenna (not included)]
• Disconnect the FM indoor antenna.
• The antenna should be installed by a
competent technician.
AM outdoor antenna
[Using a vinyl wire (not included)]
Run a piece of vinyl wire horizontally
across a window or other convenient
location.
Leave the AM loop
antenna connected.
Rework your outdoor antenna's 75 _ coaxial cable as follows.
O Remove a piece of the outer
vinyl insulator.
O Carefully pull the tabs apart
to remove the cover.
H
10 mm (13/32")
10 mm (W32") Peel back @/_'@'_@
7 mm (%2")
O Install the coaxial cable.
Clamp the cable conductor, and
wind it on so that it does not
contact anything else.
Clamp with pliers
O Attach the cover.
Connection to an amplifier via the SURROUND and SURROUND BACK terminals
You can enjoy 7.1ch surround sound by connecting an amplifier using audio cable via the SURROUND and SURROUND BACK terminals.
Surround back speakers
Surround speakers
• "_" or 't_" blinks if you do not use
the wireless system. In this case, remove
the digital transmitter.
RQT9129