Panasonic DVD-CV50 Operating Instructions Manual page 5

| Remote control preparations |
Use of batteries
e Align the poles (+ and —) properly when inserting the batteries.
e Do not mix old and new batteries or different types of batteries.
Do not recharge ordinary dry cell batteries.
Do not heat or disassemble the batteries. Do not allow them to con-
tact flame or water.
Remove the batteries if the unit is not to be used for a long time.
¢Do not keep together with metallic objects such as necklaces.
Do not use rechargeable type batteries.
ə Do not use batteries if the covering has been peeled off.
Gettin Starte
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
About 23 feet B Correct method of use
{7 meters} in front of
the signal sensor
Operation notes
Do not place obstacles between the remote control signal sensor
and remote control unit.
¢Do not expose the remote contro! signal sensor to direct sunlight or
to the bright light of a fluorescent light.
e Take care to keep the remote control signal sensor and end of the
remote control unit free from the dust.
elf this system is installed in a rack with glass doors, the glass doors'
thickness or color might make it necessary to use the remote con-
tro! a shorter distance from the system.
Transmission
——
Uee e ee
To prevent damage
Never place heavy items on top of the unit.
Do not disassemble or reconstruct the unit.
è Do not spill water or other liquids into the unit.
5
RQT5455