Panasonic DVD-CV50 Operating Instructions Manual page 43

Setting the size and presence of your
Speaker Setting ! A
(eq) See f E) speakers
i jw a=} ebuuatay. © 1. Press the cursor buttons [A, Y, <, >] to select the item and
i . Yes/No press [ENTER].
2. Press the cursor buttons [A, F] to select the setting and
press [ENTER].
Large speaker icon
If the speaker supports low-frequency (under 100 Hz) reproduc
Surround (L} Surround (R) tion.
Large/Small/No Large/Small/No eSmall speaker icon
Underlined items are factory preset.
If the speaker does not support low-frequency reproduction.
eif you do not connect a subwoofer, it is preferable to connect front
In case of surround speaker speakers (L/R) capable of producing bass of less than 100Hz.
:ʧ Delay time
Set delay time to "O ms" (factory preset) if Dr is less than or
equal to Dc.
eS | menso o
approx. 5 feet (150 cm)
_ Press RETURN to ext
Surround speaker
Set delay time to "O ms" (factory preset) if Dr and Ds are equal.
approx atest (00e | 106ms |
$v aa C Channel balance '
_ Ideal surround
speaker position
Home Theat i
1. Press the cursor buttons [A, V, <, >] to select "Test" and
press [ENTER].
A test signal is output from one speaker at a time, starting with the
front left speaker and proceeding clockwise.
FRONT(L)——> CENTER—-——> FRONT(R)
Center SURROUND(L)
channel balance (0 dB)
SURROUND(R)
2. While listening to the test signal, press the cursor buttons
[A4, V] to adjust the volume of the center and surround
speakers so they are the same apparent volume as the front
speakers. (The front speakers cannot be adjusted here.)
channel Doo
balance @No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to your taste.
Test signa!
Surround (L) Surround (R)
channel balance (0dB) channel balance (Q dB)
e Underlined items are factory preset.
i RQT5455