Table of Contents
Advertisement
Possible Cause
Clothes too
Household drain may be
wet (cont.)
clogged
Drain hose siphoning;
down the drain
Incomplete
Automatic load
not advancing
Pump clogged
Drain hose is kinked or
Household drain may be
clogged
Drain hose siphoning;
down the drain
unusual noise;
vibration or
shaking
the floor
Unbalanced load
Pump clogged
What To Do
• Check household
to call a plumber.
• Ensure there is an air gap
between hose and drain.
• Timer adds 3 minutes to
11 or 15 rebalances may
the machine will finish
• See page 26 on how to
clean the Pump Filter.
• Straight drain hose and
make sure washer is not
sitting on it.
• Check household
to call a plumber.
• Ensure there is an air gap
between hose and drain.
1/4
transmitted to the floor.
• Push and pull on the
back right and then back
so they are all firmly
touching the floor and
installer should correct
this problem.
• Open door and manually
redistribute load. To
and spin with no load. If
normal, unbalance was
caused by load.
• See page 26 on how to
clean the Pump Filter.
31
Advertisement
Table of Contents
