hardware in the plastic bag provided.
INSTALLING THE WASHER
1.
2.
washer into the hose fitting if it has fallen out during shipment.
Carefully connect the inlet hose marked HOT to the rear "H" inlet
3. Install the screen washers by inserting them into the free ends of the
inlet hoses with protruded side facing the faucet.
4.
tightly by hand, then tighten another
5.
into position ensuring inlet hoses do not become kinked. It is important
washer into its final position.
NOTE: To reduce vibration, ensure that all four rubber leveling legs are
firmly touching the floor. Push and pull on the back right and then back
left of your washer.
2/3
11