Insignia BestBuy NS-46E570A11 Service Manual page 26

46"LCD TV
Do the Auto color for the component input resolution
1. Connect the VP403 to the TV
2. On the VP403, select the signal type "HDTV/SDTV-YPbPr", format "1080i29".
3. Set the VP403 pattern "SMPTEBar"
4. Press the input key on the remote controller and select the
5. Then press the key "MENU", "1", "9", "9", "9", "ENTER" on the remote controller, then enter the "Factory Set
Mode" And switch to the
6. Then switch to the "Exit" and finish the Component ADC calibration.
Do the Auto color for the AV1 input resolution
1. Connect the VP403 to the TV
2. On the VP403, select the signal type NTSC/PAL", format "NTSC".
3. Set the VP403 pattern "SMPTEBar"
4. Press the input key on the remote controller and select the
5. Then press the key "MENU", "1", "9", "9", "9", "ENTER" on the remote controller, then enter the "Factory Set
Mode" And switch to the
6. Then switch to the "Exit" and finish the AV1 ADC calibration.
Do the Auto color for the AV2 input resolution
1. Connect the VP403 to the TV
2. On the VP403, select the signal type NTSC/PAL", format "NTSC".
3. Set the VP403 pattern "SMPTEBar"
4. Press the input key on the remote controller and select the
5. Then press the key "MENU", "1", "9", "9", "9", "ENTER" on the remote controller, then enter the "Factory Set
Mode" And switch to the
Component1 connector.
"Auto Color" item then press the "ENTER" key to do the ADC calibration.
AV1-S-Video connector.
"Auto Color" item then press the "ENTER" key to do the ADC calibration.
AV2-Composite
"Auto Color" item then press the "ENTER" key to do the ADC calibration.
COMPONENT1
AV1 input.
connector.
AV2 input.
26
BestBuy NS-46E570A11
input.