BBQ 15897 Use And Care Manual page 9

FRONT
S HELF
Q
Atign holes on assembEed front shelf
(5) with holes on grill body and legs
as shown°
_nsert phillips head screw (A) through
hotes on front shelf (5) into grill body,
Secure using hex flange nuts (C)
Altach shetf support brackets (7) to
grill legs using phillips head screws
(G) Secure using hex flange nuls (C),,
AXLE
i
Note: Carefully reposition grill as
shown°
[nsed axle (11) through holes on legs
(14) and (15) then attach axle bushing
(i) onto each end,S_ide wileets (10)
onto axle as shown (wide side of
wheel hub faces in), Secure with
crown nut (F),
Fully tighten aft hardware at this ttme
Page 9