Advertisement
Available languages
Available languages
GRILL BODY
Note: Be sure legs (13) and (15) are
assembled correctly showing
hardware
holes in front to allow
front shelf attachmenL
Legs (14) and (15) have 2 additional
holes to allow wheel assembly,
Make sure these legs are on the
opposite
end of the smoker box
opening_
Place grill body (2) with smoker box
opening to the left, onto assembled
legs.. Tightly secure griI! body 1o Iegs
using washers (E), phillips head
screws (G). and hex flange nuts (C)
Attach grill body (2) to leg brackets (9)
using washers (E), phillips head
screws (A), and hex flange nuts (C)
as shown,,
Do not fully tighten screws at this
time
FRONT SHELF BRACKETS
Note: Position brackets so sharper
angled ends are used to connect to
grill legs,
Altach shelf suppoff brackets (7) to
front she_ (5) using phillips head
screws (A),
Do not fully tighten at this time
Page B
Advertisement
