BBQ 15897 Use And Care Manual page 10

Note: Do not fully tighten smoker
box bracket screws at this time,
Bracket may need to be adjusted in
Step 13o
Atiach smoker box bracket (B) to
smoker box bottom (4) using phillips
head screws (A) and hex flar_ge nuts
(C) as shown,
Place smoker box top (3) onto smoker
box bollom (4), Insed phiIlips head
screws (A) through holes in outer lip
of smoker box as shown. Repeat on
opposite side _ghten securely
ATTACH SMOKER BOX
\
\
\k
\
%
GET A HELPER! UNIT tS HEAVY°
CAREFULLY TURN GRILL ONTO
ITS LEGS,
Some parts not shown for clarity,
Insed 2 phillips head screws (A)
hal_ay into smoker box connecUon
holes as shown,,
Carefully insed attached phillips head
screws into keyholes on side of"grill
body (2)., Secure smoker box to grill
body with remaining phillips head
screws(A),
Align holes in firebox bracket (8) with
holes in grfll legs (t2) and (13), Use
phillips head screws (G) and flange
nuts (C) to secure
Fufly tighten all hardware at this time,
including ftle 2 halfway inseded
SCrews
Page 10