Helmet Holding Cable - Yamaha NIKEN 2019 Owner's Manual

Instrument and control functions
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then place the seat
in the original position.
1
4
2
1. Projection
2. Seat holder
2. Install the bolts with the hexagon
wrench.
3. Insert the hexagon wrench back
into its holder on the passenger
seat.
4. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.

Helmet holding cable

A helmet holding cable is provided to
allow you to secure helmet(s) to the ve-
hicle.
3
1
4
1. Helmet holding cable
2. Passenger seat
3. Projection
4. Helmet strap buckle
To secure a helmet with the helmet
holding cable
1. Remove the passenger seat.
2. Remove the storage pouch and
cable.
4-26
EAU84590
1
2
1. Storage pouch
3. Pass the helmet holding cable
through the buckle on the helmet
strap.
4. Loop the ends of the helmet hold-
ing cable around the projection on
the passenger seat.
5. Install the
WARNING! Never ride with a
helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.
passenger seat.
[EWA10162]