Yamaha MXT9L 2019 Manual page 32

Instrument and control functions
 After resetting, "– –.–" will be
shown until the vehicle has trav-
eled a sufficient distance.
 The display units cannot be
switched between "km/L", "L/100
km", and "MPG" in this mode;
change to the instantaneous fuel
4
consumption mode first.
Coolant temperature
1. Coolant temperature display
The temperature of the engine coolant
from 104 °F to 255 °F is shown in 1 °F
increments.
If the message "Hi" flashes, stop the
vehicle, then stop the engine and let it
cool. (See page 7-37.)
TIP
 When the coolant temperature is
below 104 °F, "Lo" will be dis-
played.
 The coolant temperature varies
with changes in the weather and
engine load.
Air temperature
1
1. Air temperature display
The temperature of the air drawn into
the intake system from 16 °F to 122 °F
is shown in 1 °F increments.
TIP
 16 °F will be displayed even if the
air temperature falls below 16 °F.
 The temperature displayed may
Brightness and shift light control
mode
1. Brightness level display
This mode cycles through five control
1
functions in the order listed below.
 Display brightness
 Shift light on / flash / off
 Shift light on r/min
 Shift light off r/min
 Shift light brightness
TIP
The brightness level display shows the
selected brightness level.
4-14
vary from the actual ambient tem-
perature.
1