Table of Contents
Advertisement
-- Editing
--
Dubbing
a tape
Using
the
A/V
connecting
cable
Connect your camcorder to the VCR using the A/V
connecting cable supplied with
your camcordor.
(1) Insert
a blank
tape (or a tape you want
to record
over) into the VCR, and insert
the recorded
tape into your camcorder.
(;*) Set the input
selector
on the VCR to LINE. Refer to the operating
instructions
of your VCR for more information.
(3) Set the POWER
switch
to VTR.
(4) Play back the recorded
tape on your camcorder.
(5) Start recording
on the VCR.
Refer to the operating
instructions
of your VCR for more
information.
: Signal flow
, S VIDEO
__
@ VIDEO
_1
¢}AUDIO
VCR
58
When
you have
finished
dubbing
a tape
Press • on both vour camcordor and tho VCR.
Be sure to clear the indicators
from the screen
If they are displayed,
press the following
buttons
not to record the indicators
on the
dubbed
tape:
DISPLAY
DATA CODE
- SEARCH
MODE on the Remote Commander
You can edit on VCRs that support the following
systems:
[] 8 mnr, I'lil_ Hi8, i¥11SVHS, S:VlIS S-VHS, _
VHSC, SiwlslN S-VHSC, [] Betamax,
ED Betamax
,'!_' mini DV [_ DV or 1:) Dk ital8
If your VCR is a monaural type
Connect
the yellow plug of the A/V connecting
cable to the video
input jack and the
white or the red plug to the audio
input jack on the VCR or the TV. When the white
plug is connected,
the left channel audio
is output,
and the red plug is connected,
the
right channel
audio is output.
If your VCR has an S video jack
Connect
using an S video cable (not supplied)
to obtain high-quality
pictures.
With this connection,
you do not need to connect the yellow (video) plug of the A/V
connecting
cable.
Connect
an S video cable (not supplied)
to the S video jacks of both your camcorder
and
the VCR.
Advertisement
Table of Contents
