Sony Digital8 DCR-TRV720 Operating Instructions Manual page 36

Using the fader function
Notes
• The overlap, wipe and dot functions work only for tapes recorded in the Digital8 t)
system.
• You cannot use the following functions while using the fader function. Also, you
cannot use the fader function while using the following functions:
Digital effect
-Low lux mode of PROGRAM AE (Overlap, wipe, or dot function only)
Super NightShot
- Tape photo recording
Before operating the overlap, wipe, or dot function
Your camcorder stores the image on the tape. As the image is being stored, the indicator
flashes quickly, and the image you are shooting disappears from the LCD or viewfinder
screen. Depending on the tape condition, the image may not be recorded clearly.
While using the bounce function, you cannot use the following functions:
Focus
-- ZooFi't
Picture eff_,ct
Note on the bounce function
The BOUNCE indicator does not appear in the following mode or functions:
D ZOOM is activated in the menu settings
- Wide mode
Picture effect
- PROGRAM AE
36