Setting Prior to Leaving
Recording the Callers' Messages
1
Press POWER ON/OFF to ON.
•The POWER indicator will light.
NOTES:
•The unit will automatically switch itself to
the Answer mode
7
seconds after you set
. the POWER ON/OFF switch or you
complete some other operations. When the
telephone rings, the unit will play back your
OGM, then it will record the callers'
messages on the tape.
•If you do not want to set the unit to the
Answer mode, set the POWER ON/OFF
switch to OFF.
Preparing the ICM Tape
After reviewing the Incoming Messages, the unit will automatically reset itself to the
Answer mode.
■ To record future messages after the last message;
leave the unit as is. All calls will be saved.
■ To record the future messages from the beginning of the tape;
- 8 -