Installing into Video Monitors
When Installing into the PVM-L Series Video Monitors
Each adaptor can be installed in the input option slot
on the left. You can install only one adaptor.
1
Remove the cover of an input
option slot on the rear panel of
your video monitor.
When installing the BKM-142HD
or BKM-150CP, remove both the
left and right covers.
2
Insert the adaptor.
3
Push the adaptor in until it is
firmly seated in the connector
inside your video monitor.
4
Tighten the both screws to retain
the adaptor.
16
(E)
Note
Disconnect the AC power plug before installing or
removing adaptors.
Cover of an input option slot