Bkm-142Hd Hd Sdi Input Adaptor; Functions; Available Signal Format (Hd Serial Digital Input); Using The Input And Output Connectors - Sony BKM-120D Installation Manual

BKM-142HD HD SDI Input Adaptor

The BKM-142HD HD SDI Input Adaptor is the video
signal input adaptor for Sony video monitors.
When installed in the input option slots of the video
monitor, it provides video input/output connectors for
the monitor and a decoder for HD serial digital signals.
For the monitors in which the BKM-142HD can be
installed, see the chart on page 1 (E).

Functions

Decoding of HD serial digital signals
The built-in decoder decodes the HD serial digital
signals.
HD serial digital input and output signal
connectors
The BKM-142HD is equipped with two input
connectors for serial digital signals and one output
connector for monitor signals.
Available Signal Format (HD
serial digital input)
The following signal formats can be input to
the HD SDI connector of the BKM-142HD. The
frame rate of the signal formats are also compatible
1
with / .
1.001
1)
• 1080/24PsF
• 1080/50I
• 1035/60I
• 1080/60I
• 720/60P
1) When the 1080/24PsF signal format is input, the monitor
scanning mode is the 48 interlace (1080/48I).
Using the Input and Output
Connectors
For information about installing the BKM-142HD in the
video monitor input option slots, see "Installing into Video
Monitors" on pages 15(E) and 16(E).
Configuration of input/output connectors
and signals that may be input
The configuration of the input and output connectors
and the signals that may be input are shown below.
HD-SD1
1
1
IN
2
2
IN
3
MONITOR
OUT
142HD
Input of HD serial digital signals
You can input HD serial digital signals to connectors
1 and 2. Input signals displayed on the video
monitor screen are output from connector 3. You
need not attach the 75-ohm termination to connector
3.
Notes
• The MONITOR OUT signals are available only when
the power of the video monitor is ON. The
MONITOR OUT signals are not available when the
monitor is in standby mode.
• The MONITOR OUT signals do not satisfy the ON-
LINE signal specifications.
HD serial digital signals
HD serial digital monitor
signals
11
(E)