Connecting The Power Cord To Your Set-Top Box; Connecting Equipment To The Wall Ac Outlets; Turning Your Set-Top Box On And Off; Lightning Storms - Pace Xi3-P User Manual

CONNECTING THE EQUIPMENT (cont.)
Do not connect your set-top box (or any other equipment such as a TV or VCR) to the power supply until
you have properly connected all the other cables.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety.

Connecting the power cord to your set-top box

Before you connect your set-top box to a wall AC outlet, connect the polarized socket on your set-top box's
power cord into the POWER connector on your set-top box's rear panel.

Connecting equipment to the wall AC outlets

Connect the polarized plugs on the power cords from your set-top box, TV, and any other equipment into wall
AC outlets. If these outlets have switches, switch them ON.

Turning your set-top box on and off

After you have connected your set-top box to the wall AC outlet (and switched this outlet ON, if it has a
switch), the Power light should light up, to show that your set-top box is on.
To turn your set-top box on or off at any time, press the
control (see also page 10, for information on your remote control).
Never turn off your set-top box by simply disconnecting it from the AC power supply. If you need to disconnect
your set-top box, turn it off by pressing the
the Power light goes red. Then wait a few seconds before removing your set-top box from the wall AC outlet.

Lightning storms

Disconnect your set-top box's power cord during lightning storms. A lightning storm may affect your set-top
box, if it is on during the storm. It may appear that it has stopped working, but you can easily restore its
operation as follows:
Unplug your set-top box from the wall AC outlet. Then plug it in again at the wall AC outlet (and, if there is a
switch by this outlet, switch it to its ON position).

Power light and Power button

WARNINGS
Power button on your set-top box or remote
Power button on your set-top box or remote control, so that
To turn your set-top box on or off,
press the
The Power light
Xi3 (PX032ANI) USER GUIDE (501-3410500)
Your cable TV service-provider
Power button.
determines the digital channels,
services, and screen information
that you see on your TV when you
use your set-top box and its remote
control.
Consult the information supplied
by your cable service-provider for
details on how to make the most of
the digital cable services. Also read
the operating instructions that are
supplied with your remote control.
Power Saving: To save power
and money, and to reduce
greenhouse gas emissions,
turn off your set-top box, using
the Power button, when it is not
in use.
NOTES
9