Table of Contents
Advertisement
Operating Environment Requirements
•
Equipment rack requirements
2. Evaluating and meeting cable requirements.
After examining your physical site and verifying that all environmental requirements
are met, evaluate and compare your existing cable plant with the requirements of
the Extreme Networks equipment to determine if you need to install new cables.
3. Meeting power requirements.
To run your equipment safely, you must meet the specific power requirements for
each switch and external power supply unit installed in the system.
For power specifications of the switches, see the specific switch listings in "Technical
Specifications."
Operating Environment Requirements
Verify that your site meets all environmental and safety requirements.
Virtually all areas of the United States are regulated by building codes and standards.
During the early planning stages of installing or modifying your network, it is important
that you develop a thorough understanding of the regulations that pertain to your
location and industry.
Meet Building and Electrical Codes
Building and electrical codes vary depending on your location. Comply with all code
specifications when planning your site and installing cable. This section lists resources
for obtaining additional information.
For information about major building codes, consult the following organization:
International Code Council (ICC)
5203 Leesburg Pike
Falls Church, VA 22041 USA
www.iccsafe.org
40
ExtremeSwitching 5420 Series Hardware Installation Guide
Site Preparation
Advertisement
Table of Contents
