5420F-48P-4Xl Switch Features - Extreme Networks ExtremeSwitching 5420 Series Installation Manual

5420F-48P-4XL Switch Features

Figure 14: 5420F-48P-4XE Rear Panel
1 = Grounding lug
2 = Fixed fan modules
5420F-48P-4XL Switch Features
The front panel of the 5420F-48P-4XL switch includes:
•
48 10/100/1000BASE-T full/half duplex (autosensing) MACsec capable ports with Type
2 PoE+ (30W).
•
4 10Gb SFP+ MACsec capable LRM capable uplink ports (unpopulated)
•
2 Stacking/SFP-DD ports (unpopulated)
•
1 Serial console port (RJ-45)
•
1 10/100/1000BASE-T out-of-band management port
•
2 USB Type-A ports for management or external flash
•
1 USB Micro-B console port
Figure 15: 5420F-48P-4XL Front Panel
1 = 10/100/1000BASE-T ports
2 = Mode button
3 = USB Micro-B console port 6 = USB Type-A ports
24 ExtremeSwitching 5420 Series Hardware Installation Guide
Note
Half-duplex is not supported on these ports when operating at 1Gbps.
4 = 10/100/1000BASE-T out-of-
band management port
5 = RJ-45 serial console port
ExtremeSwitching 5420 Series Overview
3 = AC power inlet connector
4 = Power supply slot
7 = SFP-DD stacking
ports
8 = 10G SFP+ LRM
and MACsec capable
ports