Table of Contents
Advertisement
Table 7. Security (continued)
Option
Internal HDD-0 Password
Strong Password
Password Configuration
Password Bypass
Password Change
Non-Admin Setup Changes
UEFI Capsule Firmware Updates
TPM 2.0 Security
Computrace
58
System setup
Description
NOTE:
Successful password changes take effect immediately.
Default Setting: Not set
Allows you to set, change or delete the password on the system's internal hard-disk
drive.
NOTE:
Successful password changes take effect immediately.
Default Setting: Not set
Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
NOTE:
If Strong Password is enabled, Admin and System passwords must contain at
least one uppercase character, one lowercase character and be at least 8 characters
long.
Allows you to determine the minimum and maximum length of Administrator and System
passwords.
Allows you to enable or disable the permission to bypass the System and the Internal
HDD password, when they are set. The options are:
● Disabled
● Reboot bypass
Default Setting: Disabled
Allows you to enable the disable permission to the System and Hard Drive passwords
when the admin password is set.
Default Setting: Allow Non-Admin Password Changes is selected.
Allows you to determine whether changes to the setup options are allowed when an
Administrator Password is set. If disabled the setup options are locked by the admin
password.
Allows you to controls whether the system allows BIOS update via UEFI capsule update
packages. Default setting: Enable
Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
● TPM On (enabled by default)
● Clear
● PPI Bypass for Enabled Commands
● PPI Bypass for Disabled Commands
● Attestation Enable (enabled by default)
● Key Storage Enable (enabled by default)
● SHA-256 (enabled by default)
● Disabled
● Enabled
NOTE:
To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool
(software).
Allows you to activate or disable the optional Computrace software The options are:
● Deactivate
● Disable
● Activate
NOTE:
The Activate and Disable options will permanently activate or disable the
feature and no further changes will be allowed.
Default setting: Deactivate
Advertisement
Table of Contents
