Table of Contents
Advertisement
Table 5. System Configuration (continued)
Option
SATA Operation
Drives
SMART Reporting
USB Configuration
Audio
Miscellaneous Devices
Table 6. Video
Option
LCD Brightness
Table 7. Security
Option
Admin Password
System Password
Description
● Enabled w/PXE: This option is enabled by default.
Allows you to configure the internal SATA hard-drive controller. The options are:
● Disabled
● AHCI: This option is enabled by default.
Allows you to configure the SATA drives on board. All drives are enabled by default. The
options are:
● SATA-0: This option is selected by default.
● SATA-1: This option is selected by default.
This field controls whether hard drive errors for integrated drives are reported during
system startup. This technology is part of the SMART (Self-Monitoring Analysis and
Reporting Technology) specification. This option is disabled by default.
● Enable SMART Reporting
This field configures the integrated USB controller. If Boot Support is enabled, the
system is allowed to boot any type of USB Mass Storage Devices (HDD, memory key,
floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
● Enable Boot Support: This option is selected by default.
● Enable External USB Port: This option is selected by default.
NOTE:
USB keyboard and mouse always work in the BIOS setup irrespective of
these settings.
This field enables or disables the integrated audio controller. The options are:
● Enable Microphone
● Enable Internal Speaker
NOTE:
All devices are enabled by default.
Allows you to enable or disable the following devices:
● Enable Camera
● Enabled Secure Digital (SD) Card
NOTE:
All devices are enabled by default.
Description
Allows you to set the display brightness depending up on the power source (On Battery
and On AC).
NOTE:
The Video setting will only be visible when a video card is installed into the
system.
Description
Allows you to set, change, or delete the administrator (admin) password.
NOTE:
You must set the admin password before you set the system or hard drive
password. Deleting the admin password automatically deletes the system password
and the hard drive password.
NOTE:
Successful password changes take effect immediately.
Default Setting: Not set
Allows you to set, change or delete the system password.
System setup
57
Advertisement
Table of Contents
