Casio CFX-9800G Owner's Manual page 148

Pre FS) li i s t i iti i i a
ess E)(LIST) for the table list input/specification display Select the list area to use for generation of the numeric table. Here we will use area X2.
(SET) Indicates number
of selected area.—
LIST)
. Selected list area
a
Selected area:
JETaRIEM WER 2 sER ty |
@
Display the numeric table for the function.
Specifies list area to be used for table generation
Enters list area for input of values for variable x
Deletes contents of selected list area
Deletes contents of all list areas
EXT) Fa)(TBL)
Selected cell (shows up to six: digits)
«The default list area for numeric table generation is X1.
Input the values for variable x into the list area.
There are total of six area, and for this example we will use X2. Value inside selected cel! (exponential display)
@ : LIST TABLE =X1
List 1 3Non
*Cell values can be integers up to six digits for positive value or five digits for negative
values. : :
The exponential display uses two significant digits.
«You can use the cursor keys to move the highlighting around the display to check the
values in each cell.
«Whenever you move the highlighting to the Y-column, the function for which the table
was generated appears at the top of the display.
®
(F2KEDIT) or Ge
LIST TABLE =x1
List x1 ?Hon
Number of values input for variable x.
—260— —261~
He ee i ee me