Table of Contents
Advertisement
Call waiting
When you subscribe to call waiting
service with your telephone service
provider, you hear an alert tone if there is
an incoming call while you are on another
call.
• Press
to put the current call on
hold and take the new call.
• Press
at any time to switch back
and forth between calls.
If you also subscribe to caller ID service, it
will let you see the name and telephone
number of the caller during call waiting.
It may be necessary to change your
telephone service to use this feature.
Contact your telephone service provider
if:
• You have both caller ID and call
waiting, but as separate service (you
may need to combine these service);
• You have only caller ID service, or
only call waiting service; or
• You do not subscribe to caller ID or
call waiting services.
There are fees for caller ID services. In
addition, services may not be available
in all areas.
Redial list
Review a redial list entry
1. Press
to enter the redial list.
2. Press ▼/▲repeatedly to browse until
the desired entry displays.
NOTE
• You hear a double beep when you
reach the beginning or end of the
redial list.
Store a redial number into
the phonebook
1. Press
to enter the redial list.
2. Press ▼/▲ repeatedly to browse until
the desired entry displays.
and then press ▼/▲ to
3. Press
select ADD TO PB.
4. Press
to enter name.
5. Press
to enter number.
and then press ▼/▲ to
6. Press
select MELODY 1 to MELODY 10.
7. Press
to confirm.
Redial a call from list
Using a cordless handset
1. Press
to enter the redial list.
2. Press ▼/▲ repeatedly to browse until
the desired entry displays.
3. Press
to dial.
22
NOTE
• If there is no number in the list, the
display shows EMPTY.
Delete a redial list entry
1. Press
to enter the redial list.
2. Press ▼/▲ repeatedly to browse
until the desired entry displays.
, and then press ▼/▲ to
3. Press
select DELETE.
4. Press
twice to confirm.
Delete all redial entries
1. Press
to enter the redial list.
2. Press ▼/▲ repeatedly to browse
until the desired entry displays.
, and then press ▼/▲ to
3. Press
select DELETE ALL.
4. Press
twice to confirm.
Find handset
This feature helps you find all system
handsets.
CAUTIONS
• Do not press and hold
for more
than four seconds. It may lead to
handset deregistration.
• If the handset displays To register
HS... and ...see manual, refer to
Frequent asked questions to register
the handset back to the telephone
base.
To start paging
Press
on the telephone base.
• All idle handsets ring and display
PAGING.
NOTE
• Paging tone continues on the other
handset.
To end paging
• Press
again on the telephone
base;
• Press
,
,
on the
handset; or
• Place the handset in the handset
base / charger.
NOTE
• Paging tone stops when paging
stops.
23
Advertisement
Table of Contents
